Soft starters

  

>> For more information visit our new website www.sah.co.rs <<

    

          

Soft starters series HFR1000
(from 15 KW to 315 KW)

About Manufacturer and Certificates

Main Features

Technical Parameters

Models and Prices

Mounting sizes

Instruction Manual

Software for controlling and adjusting Soft Starters

ISO 9001 CE Certificates

NOTE :

This software can not be used on the same PC with software for controlling and adjusting variable frequency drivers series F1500-G

 

Main Features

Startup mode

1. Current limiting startup: low down the start voltagelimit the start current by keypad settingrandom adjusting.
2. Voltage ramp startup: smooth start for motor, reduce the concussion of electric network by start current.
3. Kick startup

Stop mode

1. Free stop

2. Soft stop

Control mode

Keypad control, Terminal control, Modbus control

System control function

1. The outputinput connect point can be the programmable point, internal intelligentized programs can check the status of drive-system.
2. Standard internal port (MODBUS) can realize PC/PLC control.
3. LED display, operator can set all the parameter program by keypad control.
4. Keypad control remote control.
5. Delay relay output function
6. Malfunction output relay function
7. One soft starter control more than one motor.

System protection function

1. Over current protection

2. Over load protection

3. Out phase protection

4. Over heat protection

Communication

MODBUS

Fault functions

1. Fault Diagnosis
2. The fault can be displayed or relay output can be used

Back To Top

 

Technical Parameters

3-Phase power supply

AC 380Vą20%, 50Hz

Nominal current

30A~630A

Motor power

15~315KW (380V)

Startup mode

Voltage ramp startup (1̚120 seconds, adjustable);
Current limiting startup (150~400%, adjustable);
Voltage kick startup

Stop mode

Free stop; soft stop (1̚60seconds , adjustable)

Relay output

Delay running output; fault output; full voltage output (by pass) [contact dot: 5A, 250VAC]

Protection function

Phase loss of input, over-load, short circuit, over-heating, and etc.

Safety degree

IP20

Cooling mode

Cooling naturally

Environment conditions

Environment temperature: -10oC~+50oC
Relative humidity: ≤95%(20oą5o)
Free from flammable gas, explosive gas and corrosive gas, free from electric dust, to be installed indoors with good ventilation
Vibration below 0.5G
If the altitude is above 2000m, the capacity should be decreased accordingly for application.

Back To Top

 

Models and Prices

Product Name

Power

Price

HFR-1015

15 KW

340,0€

HFR-1022

22 KW

380,0€

HFR-1030

30 KW

450,0€

HFR-1037

37 KW

520,0€

HFR-1045

45 KW

600,0€

HFR-1055

55 KW

900,0€

HFR-1075

75 KW

1050,0€

HFR-1090 90 KW

1250,0€

HFR-1110

110 KW

1500,0€

HFR-1132 132 KW

1700,0€

HFR-1160

160 KW

2000,0€

HFR-1160

250 KW

2700,0€

HFR-1315

315 KW

3200,0€
Back To Top

 

Mounting sizes

15KW-55KW

75KW-315KW

Model

A(mm)

B(mm)

C(mm)

E(mm)

F(mm)

Hole Dia (mm)

HFR1015(15KW)

250

153

162

219

140

Φ6

HFR1022(22KW)

250

153

162

219

140

Φ6

HFR1030(30KW)

250

153

162

219

140

Φ6

HFR1037(37KW)

250

153

162

219

140

Φ6

HFR1045(45KW)

250

153

162

219

140

Φ6

HFR1055(55KW)

250

153

162

219

140

Φ6

HFR1075(75KW)

510

260

194

389

232.5

Φ8.5

HFR1090(90KW)

510

260

194

389

232.5

Φ8.5

HFR1110(110KW)

510

260

194

389

232.5

Φ8.5

HFR1132(132KW)

510

260

194

389

232.5

Φ8.5

HFR1160(160KW)

510

260

194

389

232.5

Φ8.5

HFR1200(200KW)

510

260

194

389

232.5

Φ8.5

HFR1220(220KW)

590

360

255

560

300

Φ8.5

HFR1250(250KW)

590

360

255

560

300

Φ8.5

HFR1280(280KW)

590

360

255

560

300

Φ8.5

HFR1315(315KW)

590

360

255

560

300

Φ8.5

Back To Top