GYSSR-200DA 200A Single phase solid state relay

>> The prices on the website are wholesale, without VAT and for guidance <<

 

GYSSR-200D

40,0€

 

Load current

200A

Load voltage

24~440VAC

Control voltage

3-32VDC

Control current

DC7-32mA

On-off time

≤10mS

On leakage Current

≤4mA

Dielectric Strength

2500VAC
Insulation Resistance 1000MΩ/500VDC

Ambient Temperature

-20~+70 oC
Working station indicator LED
Weight  230g 
HARDWARE SCHEME:

OPERATION NOTICE: 
1. Resistive load could not exceed 60% of the rated current.
2. Inductive or capacitive load could not exceed 40% of the rated current.
3. Electric machine load could not exceed 20% of the rated current.
4. Proper radiator adapted to the working requirement of solid state relay should be equipped, the allowance should be
    widened when the load radiating condition is not so good. Short-circuit load is not allowable.
5. Over current protection: over current and short circuit are the main reasons for permanent damage of output
    controllable silicon in the SSR, and using fast fuse and air switch is one of methods for over current protection, fuse is
    also available for small capacity.
6. Over voltage protection: It can adopt parallel voltage-dependent resistance(MOV), the MOV area decides the
    absorption power, while its thickness decides the protective voltage value, generally, 471/10D voltage-dependent
    resistance for 220V series SSR, 681/10D voltage-dependent resistance for 380V series SSR, 821/10D
    voltage-dependent resistance for 480V series SSR.  

Back To Top ▲